send link to app

UHFRControl


4.0 ( 3520 ratings )
Diensten Muziek
Developer: Andreas Zeh
9.99 USD

This application offers the possibility to remote control SHURE® UHFR-Series receivers and preform scans with them via your iPad®.

UHFRControl can monitor the following parameters of your UHFR-Series receivers:

• Audio Level
• Antenna Level & Diversity
• Frequency
• Squelch
• Gain
• Sensitivity
• Battery Level
• Transmit Power
• Locks (Frequency & Power)

UHFRControl can control the following parameters of your UHFR-Series receivers:

• Frequency
• Squelch
• Audio Output & Mute
• Name

UHFRControl can set of the Sync-Parameters of your UHFR-Series receivers:

• Sensitivity
• Gain
• Transmit Power
• Battery Type
• Locks (Frequency & Power)

UHFRControl let´s you preform scans UHFR-Series receivers and save them for later use:

• Scan your receivers frequency band.
• Save the scans to the iPad®.
• Export the scans to the iPad® in the SHURE® Wireless Workbench 6 format.
• Import scans from the iPad®.
• Import scans to the iPad® in the SHURE® Wireless Workbench 6 format.
• Exchange the saved files via iTunes on your Mac® / PC.

IMPORTANT NOTES:

• UHFRControl has NO offline mode.
• You will need a working wireless connection (means: a WIFI-Router) to the SHURE® UHFR-Series receivers.
• All receivers need to be in the same subnet-mask & ip-range.
• The receivers need a minimum firmware version of V1.167.
• UHFRControl will work on any iPad® or iPad mini® with iOS 5.1 or higher.
• Although well tested - this application remain a piece of software: rockbaby engineering will not take any responsibility for any issues that may occur using UHFRControl.